3-30K
Using the Centrifuge – Spincontrol Professional
44
Version 12/2008, Rev. 1.11 of 27/01/2012
Translation of the original operating manual
6.4.3 Manual Mode
6.4.3.1 Starting a Centrifugation Run
The centrifuge is ready for operation when the start key is illuminated.
Press the start key in order to start a centrifugation run.
6.4.3.2 Interrupting a Centrifugation Run
Press the stop key in order to interrupt a centrifugation run. The
centrifugation run will be terminated prematurely.
Fast stop:
Press the stop key for more than three seconds.
The centrifuge decelerates with the maximum deceleration curve.
After a fast stop, the centrifuge lid must be opened before a new
centrifugation run can be started.
A fast stop can also be triggered during a normal deceleration, e.g. in
order to speed up the deceleration.
When a fast stop is triggered, “FAST STOP” will be displayed in the
speed field.
6.4.3.3 Interrupting a Deceleration Process
Press the start key during a deceleration process in order to
interrupt it and to restart the centrifuge.
6.4.3.4
Selection, Display, and Modification of Data
The standard menu is displayed. No area is inverted.
Turn the function knob in order to select a field. The set value of
the field starts to flash.
Press the function knob. The display starts to flash and the
modification mode is active.
Turn the function knob in order to modify the set value of the
selected field.
Press the function knob again to confirm the entry and to quit the
modification mode.
