3-30K
Using the Centrifuge – Spincontrol Professional
56
Version 12/2008, Rev. 1.11 of 27/01/2012
Translation of the original operating manual
6.4.3.10 Changing the Contrast
Press and hold the stop key and turn the function knob one notch
to the left. A dialog box will be displayed.
Adjust the contrast of the centrifuge display and confirm the
change.
Fig.6.38: Dialog box for changing the contrast
6.4.3.11 Modification of Parameter Values during the Centrifugation Run
(see 6.4.3.4 “Selection, Display, and Modification of Data"):
Modification possible Modification
impossible
(De-)Activating
possible
Speed
Rotor
Continuous run
RCF
Program
Standstill cooling
Runtime
Radius
Start delay
Temperature
Density
Automatic lid opening
function
Acceleration curve
(except for free curves)
Deceleration curve
(brake)
Parameter changes concerning the speed, RCF, and time do not
refer to acceleration or deceleration processes, but rather to the run
phase.
