3-30K
Using the Centrifuge – Spincontrol Comfort
40
Version 12/2008, Rev. 1.11 of 27/01/2012
Translation of the original operating manual
6.3.4.1 Loading a Program
1. Loading a program by entering a program number
Select the program field ("PROG-") and confirm the selection.
Turn the knob. As a result, all of the programs that have already
been saved and the current ("--") setting will be displayed one
after the other.
Select a program and confirm the selection. A dialog box will be
displayed (Fig. 6.25).
Select "LOAD" and confirm the selection.
Fig. 6.24: Loading a program
2. Loading a program from the program selection list
Select the double arrow ( ) next to the program selection list and
confirm the selection. An overview of all of the programs that have
already been saved will be displayed. The current setting will be
displayed under "-".
Select a program and confirm the selection. A dialog box will be
displayed (Fig. 6.25).
Select "LOAD" and confirm the selection.
6.3.4.2 Saving a Program
Enter the parameters that are to be included in the program.
Select the double arrow ( ) next to the program selection list and
confirm the selection. An overview of all of the programs that have
already been saved, and of the free program storage locations will
be displayed.
Select the desired program storage location from the program
selection list and confirm the selection. A dialog box will be
displayed.
Select "SAVE" and confirm the selection.
The program is now saved.
Fig. 6.25: Saving a program
