3-30K
Using the Centrifuge – Spincontrol Professional
48
Version 12/2008, Rev. 1.11 of 27/01/2012
Translation of the original operating manual
Acceleration
This function is used to select an acceleration curve. One can select
a linear rise (curves 0-9) or a quadratic rise (curves 10-19). The
acceleration curves 20-29 can be programmed as desired.
Their shape is explained in detail in 11.3.1 "Linear Curves" and 11.3.2
"Quadratic Curves".
Deceleration (Brake)
This function is used in order to select a curve that decelerates the
centrifuge to a standstill. Deceleration curves are inverted images of
the acceleration curves and are labelled with identical numbers.
Deceleration curve no. 0 represents a brakeless deceleration.
6.4.3.6 Profile Menu
This menu shows the profiles that are used. A profile begins and ends
with 0 speed. The vertical axis shows the speed and the horizontal
axis shows the time.
Changing the scale:
Select the value that is to be changed. The activated display
flashes.
Change the value and confirm it.
The value is saved.
Fig. 6.32: Profile menu
Automatic adaptation of the view
Select the zero point. The activated display flashes.
Turn to the left in order to select "auto" and confirm the selection.
The view will now be automatically adapted to the curve.
