3-30K
Short Operating Instructions
Page 2
Version 12/2008, Rev. 1.0
English translation - sb
5.
Enter run parameters:
Spincontrol Comfort
Spincontrol Professional
Manual Mode
Select a parameter by pressing or
turning the function knob. The selected
field will be inverted.
Press the function knob in order to
activate the modification mode. "SET"
and the selected area will be inverted.
Turn the function knob until the desired
value is displayed.
Press the function knob to confirm the
selected value and to quit the
modification mode. "SET" and the
selected area will be deactivated.
Program Mode
Select the program field ("PROG-") and
confirm the selection.
Turn the knob. As a result, all of the
programs that have already been saved
and the current ("--") setting will be
displayed one after the other.
Select a program and confirm the
selection. A dialog box will be displayed.
Select "LOAD" and confirm the
selection.
Manual Mode
Turn the function knob in order to select
a field. The set value of the field starts to
flash.
Press the function knob. The display
starts to flash and the modification mode
is active.
Turn the function knob in order to modify
the set value of the selected field.
Press the function knob again to confirm
the entry and to quit the modification
mode.
Program Mode
Select the option "Progr" from the
“Standard” menu and confirm the
selection. The program selection list will
be displayed .
Select the desired program from the list
and confirm the selection.
6.
Press the start key to start a centrifugation run.
7.
Parameter values can be modified during the centrifugation run as described under
"Manual Mode" in this document.
8.
The centrifugation run can be interrupted at any time by pressing the stop key.
