SIGLENT SSA5083A, User Manual, Page: 93 / 260

User Manual 63
:CALCulate:MARKer:PEAK:EXCursion?
Instructions Sets/gets a relative threshold for the peak search criteria
Parameter Type Float
，
unitdB
Parameter Range 0 ~ 200.0 dB
Return
Float
，
unitdB
Example :CALCulate:MARKer:PEAK:EXCursion 10
Command format :CALCulate:MARKer:PEAK:EXCursion:STATe
:CALCulate:MARKer:PEAK:EXCursion:STATe?
Instructions Set and obtain the relative threshold switch
Parameter Type Boolean
Parameter Range OFF|ON|0|1
Return 0|1
Example :CALCulate:MARKer:PEAK:EXCursion:STATe ON
3.7.12.3
Count Peak
Enable or disable continuous peak search. The default is Off. When enabled, the system will
always execute a peak search automatically after each sweep in order to track the signal under
measurement.
Command format :CALCulate:MARKer[1]|2|3|4|5|6|7|8:CPSearch[:STATe]
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:CPSearch[:STATe]?
Instructions Enable the continuous peak search function
Gets the status of the continuous peak search function switch
Parameter Type Boolean
Parameter Range OFF|ON|0|1
Return 0|1
Example :CALCulate:MARKer1:CPSEarch ON
3.7.12.4
Peak Table
Open the peak table (in the lower window) which lists the peaks (with frequency and amplitude)
that meet the peak search condition. Up to 30 peaks can be displayed in the table.
Command format :CALCulate:MARKer:PEAK:TABLe
:CALCulate:MARKer:PEAK:TABLe?