SIGLENT SSA5083A, User Manual, Page: 51 / 260

User Manual 21
3.2.4 Filter Type
EMI filter according to CISPR16 standard. Different from ordinary RBW filter, EMI filter support
-
6dB bandwidth.
Support bandwidth 200Hz, 9kHz, 120kHz, 1MHz.
Command Format [:SENSe]:FILTer:TYPE EMI|GAUSS
[:SENSe]:FILTer:TYPE?
Instruction Sets filter type
Gets filter type
Parameter Type Enumeration
Parameter Range EMI|GAUSS
Return Enumeration
Example :FILTer:TYPE EMI
3.3 Sweep
3.3.1 Sweep Type
There are two sweep types, Swept and FFT. Swept can only support a minimum of 3kHz RBW,
and conversely FFT can only support a maximum of 10kHz RBW.
⚫ Sweep Type Rules
Speed is preferred. This selection tells the analyzer to select the faster sweep type based on
the sweep time when it automatically switches sweep types.
Dynamic range is preferred. This option tells the analyzer to automatically switch sweep types
based on dynamic range, but if the dynamic range is very close to the swept and FFT, choose
the faster one.
⚫ Auto Sweep Type
When automatic sweep type is enabled, the analyzer automatically switches sweep types
based on RBW and sweep type rules.
When the sweep type rule is speed first, and RBW Less than or equal to 10kHz, switch to FFT
mode; otherwise, switch to normal sweep.
Command Format [:SENSe]:SWEep:MODE FFT|SWEep
[:SENSe]:SWEep:MODE?
Instruction Sets sweep mode.