SIGLENT SSA5083A, User Manual, Page: 35 / 260

User Manual 5
5
USB
Device Through this interface, the analyzer can be connected to PC for
remote control.
6 HDMI
Output the LCD screen display content of the analyzer and connect
it to the external monitor through HDMI cable for synchronous
display.
7 Audio
3.5 mm audio cable jack, which can be externally connected with
headphones or speakers to monitor the audio demodulation output
of modulated signals. Set the parameter in Meas Setup menu.
8 OCXO
The OCXO reference clock source with better temperature
coefficient and clock accuracy can be selected to obtain a more
stable reference clock. This module is a factory installed option.
9
REF IN
10 MHz
The [10 MHz IN] and [10 MHz OUT] connectors are usually used to
build synchronization among multiple instruments.
The analyzer can use the internal or an external reference source.
Set the parameter in Input/Output menu
10
REF OUT
10 MHz
The [10 MHz IN] and [10 MHz OUT] connectors are usually used to
build synchronization among multiple instruments.
When an internal reference source is used, the [10 MHz OUT]
connector can output a 10 MHz clock signal generated by the
analyzer. This signal can be used to synchronize other instruments.
11
TRIG
OUT
Trigger output to indicate various working states inside the analyzer,
which is used to establish event synchronization among multiple
instruments.Set the parameter in Input/Output menu.
12 TRIG IN
In external trigger mode, the analyzer will update the trace scan after
the Trigger In connector receives an external trigger signal that
meets the trigger input specifications.
Set the parameter in Trigger
menu.
13
AC Power
Supply
Before power on, please ensure that the ground wire of AC power
supply is well connected with the earth, and ensure that the
grounding wire of grounding terminal is well connected with the
earth.
Please confirm that the fuse works normally before power on.