SIGLENT SSA5083A, User Manual, Page: 173 / 260

User Manual 143
Parameter Range 1 ~ 1000
Return Integer
Example :AVERage:COUNt 20
5.1.1.2
Statistic
Turn on the statistics function, the measurement results will display the maximum and minimum
values of the statistics, turn off the statistics function, the measurement results will only display the
real-time measurement value. Statistics are disabled by default.
After performing a remeasurement, the statistical results will be cleared and the statistics will be
restarted. If the averaging function is turned on, the average calculation of the measurement
results will also be cleared and restarted.
Command format [:SENSe]:STATistic:STATe
[:SENSe]:STATistic:STATe?
Instructions Set digital demodulation measurement statistics status
Query the statistical status of digital demodulation measurements
Parameter type Boolean
Parameter Range OFF|ON|0|1
Return Enumeration
Example :STATistic:STATeON
Command format :CALCulate:RESTart
Instructions Restart the statistical measurements
Example :CALCulate:RESTart
5.1.2 Demod
5.1.2.1
Demod Type & Format
Modulation types are as follows:
QAM modulation : 8QAM
、
16QAM
、
32QAM
、
64QAM
、
128QAM
、
256QAM
PSK modulation : BPSK
、
QPSK
、
8PSK
、
DBPSK
、
DQPSK
、
D8PSK
、
pi/4 DQPSK
、
pi/8 DQPSK
、
OQPSK
FSK modulation : 2FSK 、 4FSK 、 8FSK 、 MSK
ASK modulation : 2ASK