SIGLENT SSA5083A, User Manual, Page: 133 / 260

User Manual 103
3.9.10.4
Harmonic Num
Set the total number of the harmonics to be measured.
Command format [:SENSe]:HARMonics:NUMBer
[:SENSe]:HARMonics:NUMBer?
Instructions Set harmonic number
Querying harmonic number
Parameter Type Integer
Parameter Range 2 ~ 10
Return Integer
Example :HARMonics:NUMBer 5
3.9.10.5
Select Harmonic
When "All " is selected, the trace shows the fundamental wave and all harmonics in the sweep
bandwidth.
When 1-10 is selected, the trace shows a zero span trace corresponding to the fundamental wave
or the measured harmonic.
Command format [:SENSe]:HARMonics:SELect
[:SENSe]:HARMonics:SELect?
Instructions Set select harmonic
Query select harmonics
Parameter Type Integer
Parameter Range 0 ~ 10
Return Integer
Example :HARMonics:SELect 7