SIGLENT SSA5083A, User Manual, Page: 84 / 260

54
User Manual
Command format :CALCulate[:SELected]:MARKer:COUPle
:CALCulate[:SELected]:MARKer:COUPle?
Instructions Set/query the marker coupling switch
Parameter Type Boolean
Parameter Range ON|OFF|0|1
Return 0|1
Example :CALCulate:MARKer:COUPle 1
:CALCulate:MARKer:COUPle?
3.7.8 Marker Lines
Mark the marker with the intersection of horizontal and vertical lines, which is more convenient to
query the marker position in the waveform area.
Command format :CALCulate:MARKer[1]|2|3|4|5|6|7|8:X:LINE:STATe
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:X:LINE:STATe?
Instructions Sets/gets the marker line switch
Parameter Type Boolean
Parameter Range ON|OFF|0|1
Return 0|1
Example :CALCulate:MARKer2:X:LINE:STATe 1
:CALCulate:MARKer2:X:LINE:STATe?
3.7.9 Marker Table
Enable or disable the Marker Table.
Display all the markers enabled on the lower portion of the screen, including marker number, trace
number, marker readout type, X-axis readout and amplitude. Through this table you can view the
measurement values of multiple points. The table allows for up to eight markers to be displayed at
one time.
Command format :CALCulate:MARKer:TABLe ON|OFF|0|1
:CALCulate:MARKer:TABLe?
Instructions Sets/gets the marker table state
Parameter Type Boolean
Parameter Range ON|OFF|0|1