SIGLENT SSA5083A, User Manual, Page: 225 / 260

User Manual 195
8.1.2 LAN port
Figure 8–1 LAN config
Refer to the following steps to finish the connection via LAN:
1
Install NI-VISA on your PC for VXI driver. Or without NI-VISA, using socket or telnet in your
PC’s Operating System.
2
Connect the analyzer to PC or the local area network with a LAN cable.
3
Switch on the analyzer.
4
Press button on the front panel System → Interface → LAN to enter the LAN Config
function menu.
5
Select the IP Config between Static and DHCP.
⚫ DHCP: the DHCP server in the current network will assign the network parameters
automatically (IP address, subnet mask, gate way) for the analyzer.
⚫
Static: you can set the IP address, subnet mask, gate way manually. Press Apply.
The analyzer will be detected automatically or manually as a new LAN point.