Siemens TS2000 Service Manual Download

Page: 48 / 65

TS2000 Service Manual

RD7409290-0 Rev. F

6-2

Messages

Solution

Parallel card has no number

•

Make sure the program was activated.

Modem Error

•

Check power to the modem

A message on system startup

•

Check the connection between the

modem and the computer.

•

Make sure the modem is set to start up

with the system

Error Message: PM is not
responding to message 6...

•

Check the Serial Communication cable

connection in the back of the system.

•

Check that the 3 LED’s on the P.M.

board are ON

•

Check the voltages on the J2 connector

on the PM. The voltages should be 5
Volts, +12 and -12 Volts.

•

Check that the setup for Com1 is

115200.

•

Check parallel cable connected the PM

adapter to the I/O card.

Amplitude Error / over
current

•

Check that there are no foreign metals

on the probe.

•

Check the connection cable between

the PM and the handheld cylinder.

•

Press the "GO" button on the probe

again. If the system is still not
responding appropriately, reboot the
system.

6.1.2 TransScan TS 2000 Error Message

Enter “Database."

Select “Service”/ “Errors” and Click “Print Last 10
Logs."

SPB7-520.840.01.01.02

Summary of Contents for TS2000


































































Search results

Summary of Contents for TS2000

Reviews:

Related manuals for TS2000

Brands by name

Popular brands

Siemens TS2000, Service Manual

Search results

Summary of Contents for TS2000

Reviews:

Related manuals for TS2000

Brands by name

Popular brands