Siemens TS2000, Service Manual

Page: 34 / 65

TS2000 Service Manual RD7409290-0 Rev. F
4-6
9.
Select model “Lexmark Optra K 1220 (or another model
according to the printer that you have in your
system.)from the list ,click “Add” then click “Next”
10.
On drivers screen for Lexmark Optra k 1220 PS2 set the
following:
11.
Select “Port LPT1”, in “Change setting” screen select
“LPT2” from the list and click on “default Printer” radio
box.
12.
On “Lexmark Optra K1220” change port as in step 10.
13.
Select “Finish” installation: software is loaded. When
loading is completed click OK and Exit.
14.
Remove CD
15.
Remove the paper drawer and make sure that the slider
on the side of the drawer is set to paper size A4 (Or to a
different size according to paper used)
16.
To set up the computer:
17.
Exit to Windows.
18.
Click Start, Setting, Printers.
19.
Right click on the printer icon marked: Lexmark… PS2.
20.
From the menu select:”Document Default”.
21.
Set the paper size to A4 210x297 mm.
22.
Set the graphics to 1200 Quality.
23.
Click “OK” and then close the printer windows.
4.4.4 PcAnywhere Installation
1.
Repeat steps 1-5 from 4.4.6.
2.
Select the PcAnywhere program from the CD.
3.
Run “Setup” from disk #1.
1. Click “next” for the 2 following dialogs .
2. Click “Yes” for the 1 following dialog.
3. Click “next” for the 2 following dialogs.
4. Program will load itself.
5. Click “next” for the 3 following dialogs.
6. Click “Skip” for the 1 following dialog.
7. Click “No” for the 1 following dialog.
4.
Remove the CD/ Click “Finish” (to restart the system
now).
SPB7-520.840.01.01.02