Siemens TS2000 Service Manual Download Page 32 | Manualshive

Page: 32 / 65

Siemens TS2000 Service Manual Download Page 32

TS2000 Service Manual

RD7409290-0 Rev. F

4-4

7.

To install a fresh copy of Windows NT, press "N," then
press "Enter."

8.

Leave the disk size as is; press "Enter" to install the
software into the directory "\WinNT," then press "Enter"
twice.

9.

Follow the onscreen instructions.

10.

When the system re-boots, enter the BIOS setup and
change the boot drive back to the hard drive.

11.

Continue to follow the onscreen instructions, press
"Next" twice.

12.

Type in the name and organization information.

13.

Type in the CD code and press "Next." Enter the
password 123456. Confirm the password and press
"Next."

14.

Select "No, do not...." and press "Next" three times.

15.

Select the "Do not connect" radio button and press
"Next," then "Finish."

16.

Select your time zone, and set the date and time
parameters, then press "Close." When you reach this
stage in the WinNT installation, you need to install the
WinNT Service Pack 4.

17.

Insert the WinNT Service Pack 4 into the CD-ROM drive
and select "Install Service Pack 4. Follow the onscreen
instructions.

4.4.1.1 Change the Start Up Time

1. Select Start|Settings|Control Panel|System.

2. Select the Startup/Shutdown tab.

3. Type in or scroll to the setting "5" in the "Show list

for.xx seconds."

4. Click

OK

and close the Control Panel.

SPB7-520.840.01.01.02

«
...
30
31
32
33
34
...
»

Summary of Contents for TS2000


































































Reviews:

No comments