manualshive.com logo in svg

Siemens SITRANS FC330, Operating Instructions Manual, Page: 42 / 280

Share
Download
Siemens SITRANS FC330 Operating Instructions Manual Download Page 42

Mounting on pipe

1. Mount mounting bracket with cushion pad on pipe using fastening brackets/U-bolts and 

supplied pipe adaptor. Note: U-bolts and other miscellaneous hardware are not supplied 

with the flowmeter. 

2. Tighten nuts (torque: 10 Nm).

Mounting the transmitter 

1. Remove locking cap from mounting bracket.
2. Mount transmitter on mounting bracket taking care that the flutes on the mating faces are 

correctly engaged.

3. Firmly tighten locking cap on mounting bracket (torque: 25 Nm).

4.2.1.2

Wall mount housing

Mounting on wall

Note
Mounting screws are not included
You will need four screws, able to support at least 55 lbs (25 kg). Siemens recommends 

M6x100 screws with appropriate anchors for the wall material.

Installing/mounting
4.2 Installation instructions

SITRANS FC330

42

Operating Instructions, 01/2019, A5E44030648-AB

Summary of Contents for SITRANS FC330

























































































































































































































































































Reviews:

No comments