Siemens SINAMICS SM150, Operating And Installation Instructions

Page: 20 / 218

WARNING
Hazardous arcing
Hazards caused by arcing can occur as result of the following factors, for example:
● The input currents are exceeded
● Incorrectly dimensioned circuit breaker or transformers
● Incorrectly connected cables or cables that have not been connected
● Excessive pollution
Arcing can result in death, serious injury or material damage.
● Make sure that the system is properly dimensioned and that the power cables are correctly
connected. The maximum permissible input currents are listed in the "Technical
specifications".
● Remove any excessive pollution.
WARNING
Live, moving or rotating parts
Contact with the parts mentioned can result in death, serious physical injury or damage to
property.
● Observe the instructions regarding installation and operation.
● Always take protective measures before touching any components.
● Do not remove any necessary covers.
WARNING
Hot component surfaces
Certain components (e.g. heat sinks and reactors) can become very hot during operation.
These components can remain hot for a long time after operation. Contact can result in serious
injury, such as skin burns.
● Do not touch hot components even after you have switched off the drive.
CAUTION
Places that are difficult to access
If you do not use appropriate protective equipment when working in places that are difficult
to access you are at risk of injury. For example, sharp edges and splinters can cause injuries
to the head and skin. If you use unsuitable steps when working on the upper areas of the
drive, you can fall and injure yourself.
● Use appropriate protective equipment, especially a hard hat and gloves.
● In the upper areas of the drive, use suitable steps.
Safety instructions
2.4 Safe handling
SINAMICS SM150 6SL3845-7NN46-7AA0
20
Operating Instructions 04/2017