Siemens SINAMICS RAILCTRL Function Manual Download Page 34

Page: 34 / 106

Upgrading a Technology Extension using scripting methods

To update a Technology extension using scripting, the same steps must be performed as for a

manual update, see "AUTOHOTSPOT". Additional steps and queries serve especially to

guarantee a safe and reliable function.

Table 4-1

Scripting methods and corresponding commissioning steps

Scripting methods

Commissioning step

GetActivatedTECs

Query, on which drive objects are Technology Extensions activated and

which version is used.

GetTECParameterRanges Query, which parameters belong to a specific, activated Technology Ex‐

tension.

Parameter

Read out and save the settings of these parameters.

DeActivateTEC

Deactivate the old TEC version.

UninstallTEC

Uninstall the old TEC version.

InstallTEC

Install the new TEC version.

SelectTECVersion

Select the new TEC version to be installed.

DownloadTEC

Download the new TEC version.

ActivateTEC

Activate the new TEC version on all drive objects on which the old version

was active. To do this, the drive objects read-out using "GetActivated‐

TECs" must now be used as target.

Parameter

Restore the parameter settings in the new TEC version.

The methods listed can be removed from the complex context and separately applied. For

instance, a text file can be created using "GetActivatedTECs" that can be used for

documentation purposes or as configuration example.
The steps defined using scripting can also be extended to include additional actions. For

example, the results from "GetActivatedTECs" can be compared with the OASP in an

installation folder. If more recent versions are saved to the installation folder, then an update

can be fully automatically performed in STARTER.

Explanations and programming examples

An overview and help for scripting methods specific to Technology Extensions are provided in

the STARTER help:
1. Open Help, by pressing key "F1", for example.
2. Double-click on folder "Scripts to Automated Execution".
3. Double-click on folder "Methods".
4. Double-click on folder "Technology Extensions methods".

A detailed description with syntax, notes and programming examples is provided in this

folder for all TEC-specific scripting methods.

Installation and activation
4.5 Scripting with STARTER or SIMOTION SCOUT

RAILCTRL

Function Manual, 09/2019, A5E38120767B

Summary of Contents for SINAMICS RAILCTRL











































































































Search results

Summary of Contents for SINAMICS RAILCTRL

Reviews:

Related manuals for SINAMICS RAILCTRL

Brands by name

Popular brands

Siemens SINAMICS RAILCTRL, Function Manual

Search results

Summary of Contents for SINAMICS RAILCTRL

Reviews:

Related manuals for SINAMICS RAILCTRL

Brands by name

Popular brands