4-13
ET 200U Distributed I/O Station
EWA 4NEB 812 6087–02b
Table 4-4
Address IDs for the Modules in an ET 200U(DP Siemens)
Order Num-
ber of Module
Address ID
ET 200U
(DP Siemens)
Address
Scope
(Byte)
Delay
Time
(ms)
1
Address
Area
Current
Consump-
tion (mA)
Power
Loss
(W)
IP 264 Electronic Cam Controller:
264–8MA11
1
223/000
8*
Analog
120
4
IP 265 High Speed Sub Control :
265–8MA01
2
223
8*
Analog
CP 521 BASIC:
521–8MB11
223
8*
Analog
180
1.6
CP 521 SI:
521–8MA21
223
8*
Analog
140
1.2
330–8MA11
or no module
plugged in
000
0
0
*
The address scope is necessary for the inputs and the outputs (i.e. if the address scope is 2 bytes, 2 bytes are used
for the inputs and 2 bytes are used for the outputs). Since COM ET200 assigns the addresses for these modules
optionally, inputs and outputs can have different start addresses.
1
The module occupies 2 slots.
2
IP 265 can be operated in Slow Mode only. Please refer to Section 4.2.1 for the Slow Mode setting.
ET 200U(DP Siemens): Address Assignment,Starting–Up,Diagnosing Faults Using COM ET200
