Configuration (WBM)
4.20 Extension board
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
199
Texts for e.mails
With e-mails, the use of text tags for the subject and for the message text is different.
●
Different texts for subject and message text
If you want to use different texts for the subject and the message text, and if this is
supported by the configurations, you can create two text tags.
The use of different texts for subject and message text is supported in the following
situations:
–
Programming e-mails via program blocks (WBM page "Program" > "Send e-mail")
–
The sending of e-mails with log files (WBM page "Operating mode" > "Logging")
●
Same texts for subject and message text
For the following e-mails only one text tag can be used both for the subject and for the
message text:
–
Notifications about the operating time of a battery or changing over battery modules
(WBM page "Operating mode" > "Power supply")
Configuration options:
If after a couple of words you insert a line break (<Enter>) and continue writing in the next
line, this has the following effect:
–
In the subject of the e-mail the line break is replaced by a blank:
–
In the message text of the e-mail, the entire text, including the line break is
transferred.
4.20
Extension board
4.20.1
General
General
Activate extension board
Activates the extension board of the RTU.
Type
The following type can be selected:
●
HART / RS-485
Protocol