Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual Download Page 257

Page: 257 / 372

Configuring with Web Based Management

4.5 "Layer 2" menu

SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03

257

The table has the following columns:
•

Select

Select the row you want to delete.

•

Bridge-ID

Shows the bridge ID.

•

Transparent

When you enable this option, the Inter-VLAN Bridge and the associated VLANs are

switched to transparent mode when the bridge is activated. Ports belonging to the

bridge become transparent ports. This means the following:

–

Tagged frames that are received at these ports are not evaluated and are

forwarded to all other ports of the Inter-VLAN bridge with unchanged tag. No

frames are forwarded from ports that do not belong to the Inter-VLAN Bridge to

ports that belong to the Inter-VLAN bridge.

–

Untagged frames that are received at these ports are also forwarded to all other

ports of the Inter-VLAN bridge without tag.

–

As long as the transparent bridge is enabled, you cannot change the port

associations of the affected VLANs.

The prerequisite for this is that the port VLAN ID of all ports belonging to the VLAN is

set to the VLAN ID.
If you disable this option, the VLAN tags are evaluated.

•

Enable

Enables the bridge between the VLANs specified in the "Configuration" tab. After it

has been enabled, the bridge adopts the IP address configuration of the VLANs for

which the Type "Master" was selected in the "Configuration" tab. The devices of the

VLANs can no longer be reached at their own IP addresses after the bridge has been

enabled but only over the IP address of the bridge.

Procedure

Create new Bridge-ID

Enter an ID in the "Bridge-ID" text box.

Click the "Create" button. A new entry is generated in the table.

Click the "Set Values" button.

Summary of Contents for SIMATIC NET SCALANCE SC-600





















































































































































































































































































































































































Search results

Summary of Contents for SIMATIC NET SCALANCE SC-600

Reviews:

Related manuals for SIMATIC NET SCALANCE SC-600

Brands by name

Popular brands

Siemens SIMATIC NET SCALANCE SC-600, Configuration Manual

Search results

Summary of Contents for SIMATIC NET SCALANCE SC-600

Reviews:

Related manuals for SIMATIC NET SCALANCE SC-600

Brands by name

Popular brands