Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
153
Requirements for sending e-mails
•
"E-mail" is activated for the relevant event in "System > Events > Configuration".
•
The desired severity is configured under "System > Events > Severity level".
•
At least one entry exists under "System > SMTP Client > Receiver" and the setting
"Send" is activated.
Description
The page contains the following boxes:
•
SMTP Client
Enable or disable the SMTP client.
•
SMTP Server Address
Enter the IP address or the FQDN (Fully Qualified Domain Name) of the SMTP server.
The table contains the following columns:
•
Select
Select the check box in a row to be deleted.
•
Status
Specify whether this SMTP server will be used.
•
SMTP Server Address
Shows the IP address or the FQDN (Fully Qualified Domain Name) of the SMTP
server.
•
Sender Email Address
Enter the e-mail address of the sender that is specified in the e-mail.
•
User Name
If necessary, enter the user name used for authentication on the SMTP server.
•
Password
If necessary, enter the password used for authentication on the SMTP server.
•
Password Confirmation
Repeat the password.
•
Port
Enter the port via which your SMTP server can be reached.
Factory settings:
–
25 (None)
–
465 (SSL/TLS and StartTLS)
Summary of Contents for SIMATIC NET SCALANCE SC-600
Page 68: ......
