Siemens SIMATIC HMI KP1200 Comfort Operating Instructions Manual Download Page 25

Page: 25 / 250

Overview

1.6 Software add-ons

Comfort Panels
Operating Instructions, 07/2017, A5E36770603-AB

1.6

Software add-ons

The following software add-ons are available for the HMI devices:

Add-on

Description

WinCC /Sm@rtServer

•

Web Server

The WinCC /Sm@rtServer add-on enables you to access

a remote HMI device from the HMI device or PC via

Ethernet. It also enables you to set up communication

between different HMI systems. The

WinCC /Sm@rtServer option also lets you use the Web

Server on the HMI device.

WinCC /Audit

The WinCC /Audit add-on extends the HMI device to

include functions for recording operations in an audit trail

and electronic signature.

WinCC /ProDiag

Use the option WinCC /ProDiag to configure detailed

plant and machine monitoring

Uninterruptable Power Supply (UPS) with

USB support

When interfacing an uninterruptible power supply, the

HMI device is shut down in a controlled manner after a

buffer time in the event of a power failure. The HMI

devices support SITOP DC UPS modules connected via

the USB port.

PDF Viewer

You can view PDF documents using the PDF Viewer.

Word Viewer

The Word Viewer enables you to view Word documents.

Excel Viewer

The Excel Viewer enables you to view Excel documents.

Media Player

You can use the Media Player to play audio and video

files.

Internet Explorer

The Internet Explorer provides you access to the Internet.

Printer driver

The printer driver option enables PostScript, HTML and

PDF output for all HMI device print options.

Transferred with the project; a license key is required for use up to WinCC V14 (TIA Portal), as of

WinCC V14 (TIA Portal), a license key is no longer required

Transferred with the project; a license key is required for use

Pre-installed; no license key is required for use

Must be transferred as an option; no license key is required for use

You can find information on licensing in the TIA information system

Summary of Contents for SIMATIC HMI KP1200 Comfort



























































































































































































































































Search results

Summary of Contents for SIMATIC HMI KP1200 Comfort

Reviews:

Related manuals for SIMATIC HMI KP1200 Comfort

Brands by name

Popular brands

Siemens SIMATIC HMI KP1200 Comfort, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC HMI KP1200 Comfort

Reviews:

Related manuals for SIMATIC HMI KP1200 Comfort

Brands by name

Popular brands