Siemens SIMATIC HMI KP1200 Comfort Operating Instructions Manual Download Page 141

Page: 141 / 250

Commissioning the device

4.3 Parameter assignment for Comfort Panel

Comfort Panels
Operating Instructions, 07/2017, A5E36770603-AB

141

To delete the selected file, press the "Delete" button.

The "Delete confirmation" dialog is displayed. The file will be deleted when you press

"OK".

10.

To restore the data of the selected file, press the "Update" button.
The "Update settings" dialog is displayed.

The dialog informs you that the settings in the Control Panel will be kept and offers you

the option of keeping or deleting license keys present on the HMI device.

11.

Press the "Update" button. The "Update OS Image" dialog is displayed.

12.

Selecting "Yes" starts the restoration of the operating system.

The "Transfer" dialog appears. A progress bar shows the status of the restore process.

The HMI device then restarts.

The operating system on the HMI device is updated.

Note
After restoring, a recalibration of the touch screen may be required, see also section

"Calibrating the touch screen (Page 88)".

Summary of Contents for SIMATIC HMI KP1200 Comfort



























































































































































































































































Search results

Summary of Contents for SIMATIC HMI KP1200 Comfort

Reviews:

Related manuals for SIMATIC HMI KP1200 Comfort

Brands by name

Popular brands

Siemens SIMATIC HMI KP1200 Comfort, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC HMI KP1200 Comfort

Reviews:

Related manuals for SIMATIC HMI KP1200 Comfort

Brands by name

Popular brands