Siemens SICAM Q100, Device Manual, Page: 203 / 376

8 Operation at Use of a PC
8.3 Configuration of the Device
203 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
8.3.7.4.3 Mapping – Indications
At
Indications
, the indications are defined which are read by a selected Modbus slave device.
Default Settings and Settings of the Modbus Slave Device 1
Table 8-27 Settings for assignment of the indications of the Modbus slave device 1
Parameter Default Setting Setting Range
Name Indication x Slv 1
(x = 1 to 6) Max. 31 characters
Register type -none- -none-
Coil status registers
Input status registers
Input registers
Holding registers
For
-none-
, the assignment is ignored
and the corresponding indication cannot
be selected for other functions.
Data format on bus
(see also Table 8-28.)
1 Bit 1 Bit
1 Bit in UInt32
Register number 1 1 to 65 535
Bit offset
(only relevant for register types
Input register or Holding register) 0 0 to 15 (for Data format 1 Bit)
0 to 31 (for Data format 1 Bit in UInt32)
Table 8-28 Data format on Bus
Data Format
on Bus
Description Setting
Range
Invalid
recognition
Used by (example)
1 Bit 1 bit (for all register types; addi-
tionall select
Bit offset
for Input
register and Holding register)
0 = of
1 = on none SICAM P50 7KG775,
SENTRON 3WL/3VL,
SIPROTEC4
1 Bit in UInt32 1 bit in 2 successive Input regis-
ters or Holding registers which
have to be read together. 0 = of
1 = on none SENTRON PAC3x00