manualshive.com logo in svg

Siemens SENTRON PAC5100, Device Manual, Page: 212 / 266

Share
Download
Siemens SENTRON PAC5100 Device Manual Download Page 212

9 Time Synchronization

9.1 General

212

SENTRON PAC5100/5200, 7KM5212/5412, Device Manual

E50417-H1040-C568-A1, Edition 03.2015

9.1

General

During operation, SENTRON PAC5100/5200 needs the date and time for all time-relevant processes. The term 

time 

is used throughout this section to refer to both the date and the time.

The time synchronization in the SENTRON PAC5100/5200 is necessary to guarantee a common time basis for 
the communication with peripheral devices and time stamping of the process data.

SENTRON PAC5100/5200 supports both external and internal time synchronization. The type of time synchro-
nization is specified during the parameterization (see chapter 7.3.6.1). The external time synchronization from 
an NTP server is preferred.

9.2

Internal Time Keeping

9.2.1

Time Format

The internal time is kept in UTC (Universal Time Coordinated) from 01.01.2000, 00:00 to 31.12.2099, 23:59.

To display the local time, for example on the HTML pages, you can configure a local time correction factor and 
the automatic adjustment to daylight saving time during parameterization (see chapter 7.3.6.1).

9.2.2

Status Bits

FAIL Status Bit

The 

FAIL

 status bit implemented in the SENTRON PAC5100/5200 signals with "0" that the time is 

valid

 and 

with "1" that the time is 

invalid

.

The status of the FAIL bit corresponds to the "Clock error" operational indication, see chapter 14.1.

The following table lists the time stamps of events or indications for the displayed operational and error logs 
according to status bit set/not set using the example of 

date 2010-09-26, time 13:49.35246

: 

DST Status Bit

With "1", the 

DST

 status bit implemented in the SENTRON PAC5100/5200 signals that the local daylight saving 

time is active. The operational indication "Daylight saving time" is displayed.

Tabelle 9-1

FAIL Status Bit for Time Synchronization via NTP Server

FAIL

Output

0

2010-09-26 13:49.35:246

1

2010-09-26 13?49?35?246

Summary of Contents for SENTRON PAC5100











































































































































































































































































Reviews:

No comments