manualshive.com logo in svg

Siemens SENTRON PAC5100, Device Manual, Page: 152 / 266

Share
Download
Siemens SENTRON PAC5100 Device Manual Download Page 152

7 Operation at Use of a PC

7.3 Configuration of the Device

152

SENTRON PAC5100/5200, 7KM5212/5412, Device Manual

E50417-H1040-C568-A1, Edition 03.2015

To change the Ethernet communication settings, proceed as follows:

✧

In the navigation window, select the 

Administrative

 menu and click 

Communication Ethernet

.

The 

Communication Ethernet 

input/output window with 

Protocol Modbus TCP

 opens.

Figure 7-44

Configure Tab, Communication Ethernet via Modbus TCP Input/Output Window

✧

Enter the desired values in the fields and select the parameters in the list boxes and in the option field as 
described in Table 7-18

.

Download SNMP Device MIB File

✧

Select 

yes

 in the 

Enable SNMP

 option (see figure 7-44).

✧

In the 

Communication Ethernet

 input/output window, click 

Download SNMP device MIB file

.

NOTE

The enabling of SNMP via option 

Enable SNMP

 is only required if you want to save the 

MIB

 file and use it in 

a MIB browser.

NOTE

The SNMP protocol is implemented in SENTRON PAC5100/5200 in order to be able to retrieve manufacturer-
specific information.
To retrieve information via SNMP, a MIB browser and the MIB file are required. The MIB browser allows the 
displaying of SNMP information objects and their content.

Summary of Contents for SENTRON PAC5100











































































































































































































































































Reviews:

No comments