manualshive.com logo in svg

Siemens SENTRON PAC5100, Device Manual, Page: 7 / 266

Share
Download
Siemens SENTRON PAC5100 Device Manual Download Page 7

 

 

7

SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015

Statement of Conformity

Further Standards

For further information see UL database on the internet: 

http://ul.com

.

Chose 

Online Certifications Directory

 and insert E228586 under 

UL File Number

.

This product complies with the directive of the Council of the European Communities on the 
approximation of the laws of the Member States relating to electromagnetic compatibility (EMC 
Council Directive 2004/108/EC) and concerning electrical equipment for use within specified voltage 
limits (Low-voltage Directive 2006/95/EC).

This conformity has been established by means of tests conducted by Siemens AG according to the 
Council Directive in agreement with the generic standards EN 61000-6-2 and EN 61000-6-4 for the 
EMC directives, and with the standard EN 61010-1 for the low-voltage directive.

The device has been designed and produced for industrial use.

The product conforms to the standard IEC 61557-12. 

This product is UL-certified to Standard UL 61010-1, third edition, based on the specification stated in Chapter 12  
(Technical Data).
UL File No.: E228586

Open-type Measuring Equipment

2UD1

Summary of Contents for SENTRON PAC5100











































































































































































































































































Reviews:

No comments