manualshive.com logo in svg

Siemens SENTRON PAC5100, Device Manual, Page: 96 / 266

Share
Download
Siemens SENTRON PAC5100 Device Manual Download Page 96

7 Operation at Use of a PC

7.1 General Usage Notes

96

SENTRON PAC5100/5200, 7KM5212/5412, Device Manual

E50417-H1040-C568-A1, Edition 03.2015

7.1

General Usage Notes

All SENTRON PAC5100/5200 device models can be operated via the HTML pages from the connected PC. 
Devices with a display can additionally be operated using the softkeys on the display side. This chapter 
describes the PC-based operation; Operation at Use of the Display covers the operation using the softkeys.

The graphical user interface is stored in the device. To display the user interface, start Microsoft Internet 
Explorer 6.0 (or higher) and enter the IP address of the device.

You can navigate through Microsoft Internet Explorer using the icons on the toolbar, for example back, forward, 
print etc. The user interface itself does not contain any navigation icons.

Operating actions are performed with the mouse. Parameters and text are entered using the keyboard.

The following table lists the control elements.

Table 7-1

Control Functions

Control Element

Control Function

Option button: selects one option

List box: selects an item from a list

Button: Executing an action by clicking the button, that is the 
current settings on the user interface are transmitted to the 
device.

Active tab (light blue)

Inactive tab (dark blue)

Selects and opens the item to be activated,
for example a tab

NOTE

At the beginning of the parameterization, first set the 

Network type

 according to Setting the Operational Pa-

rameters. If you change the 

Network type

 during operation, check all settings, measured values, and limiting 

values for inconsistencies after activating the device. Check also the ICD file which is suitable for the network 
type. If there are invalid values or a wrong ICD file, restart the device.

NOTE

If you change settings in tabs, click 

Send

 on each tab to confirm the new setting. The settings are 

activated

 

only after the entire parameterization has been completed.

Summary of Contents for SENTRON PAC5100











































































































































































































































































Reviews:

No comments