Description
3.3 Single-phase devices
7KT16 energy meter
Equipment Manual, 09/2020, 2514284147-04
21
3.3.3
Selection of measured values
Press the front key briefly to select the displayed values on the screen in the sequence shown
below.
Each measured variable is indicated by the corresponding symbol in the lower section of the
display.
One minute after you last pressed the key, the display automatically switches to the screen
for total active energy.
Symbol
Measured variable
Format
kWh
Total active energy
000000.0
kWh + part
Partial active energy
000000.0
kvarh
Total reactive energy
000000.0
kvarh + part
Partial reactive energy
000000.0
V
Voltage
000.0
A
Current
00.00
kW
Active power
00.00
kvar
Reactive power
00.00
PF
Power factor
0.00
Hz
Frequency
00.0
h
1)
Hour counter (hhhh.mm)
00000.00
h + Part
1)
Partial hour counter (hhhh.mm)
00000.00
kW + d
2)
15 min power demand values
00.00
kW + d + ▲
2)
Max. power demand values
00.00
1)
The measurements are only displayed if parameter P-08 is activated
2)
The measurements are only displayed if parameter P-09 is activated
3.3.4
Parameterization
Note
Follow the menu operation when setting the parameters. You can find more information on
this in chapter Keypad functions (Page 19).