Properties of the button on the SCALANCE X204RNA EEC (PRP/HSR):
● If the SELECT/SET button is pressed on the SCALANCE X204RNA EEC (PRP/HSR), the
mode LED goes off (display "PRP"). If the button is released within 5 seconds, the "PRP"
mode is programmed and the device goes through a restart. The SCALANCE X204RNA
(PRP/HSR) behaves in this way only with the factory settings.
● After 5 seconds, the mode LED goes on ("HSR"). If the SELECT/SET button is now
released, the "HSR" mode is programmed and the device goes through a restart.
● After 10 seconds, the mode LED returns to flashing mode (SELECT/SET button can be
released without setting a mode).
● If you have accidentally programmed the wrong mode (e.g. by releasing at the switchover
moment), you can trigger a "factory reset" after the normal startup with the normal SELECT/
SET button functionality (press for > 10 seconds) and reverse the programming.
Position of the SELECT/SET button and C-PLUG
Note
On the SCALANCE X204RNA, the SELECT/SET button is located below the C-PLUG
compartment.
On the SCALANCE X204RNA EEC, the SELECT/SET button is on the top of the device in a
recess next to the C-PLUG compartment.
Descriptions of the products
4.7 SELECT/SET button
SCALANCE X-200RNA
Operating Instructions, 10/2016, C79000-G8976-C342-04
47
Summary of Contents for SCALANCE X-200RNA
Page 6: ...Table of contents SCALANCE X 200RNA 6 Operating Instructions 10 2016 C79000 G8976 C342 04 ...
Page 12: ...Introduction SCALANCE X 200RNA 12 Operating Instructions 10 2016 C79000 G8976 C342 04 ...
Page 16: ...Safety notices SCALANCE X 200RNA 16 Operating Instructions 10 2016 C79000 G8976 C342 04 ...
