● "SNTP Mode"
The protocol type used is displayed here:
– "Poll"
If you choose this protocol type, you will need to define further settings:
Time Zone Offset, Time Server, Init Poll Interval, Poll Interval.
● "SNTP Server IP Address"
Here, you enter the IP address of the SNTP server whose frames will be used by a
SCALANCE X-200RNA to synchronize the time of day.
● "SNTP Server Port"
Here, enter the port via which the SNTP server is available.
● "Time Zone"
Select the time zone for the location of the SCALANCE X-200RNA because the SNTP
server always sends UTC time. This time is then recalculated and displayed as the local
time based on the time zone. There is no standard/daylight-saving time switchover on the
SCALANCE X-200RNA.
● "Init Poll Interval"
Here, you can enter the interval at which a SCALANCE X-200RNA repeats the poll when
the system time is initially set, if this was not successful the first time.
● "Poll Interval"
Once the system time has been adopted the first time from the time server, it is updated
cyclically with renewed polls to the time server. Here, you specify how often the updates
take place.
Functional description and configuration using Web Based Management
7.9 The "Agent" menu
SCALANCE X-200RNA
122
Operating Instructions, 10/2016, C79000-G8976-C342-04
Summary of Contents for SCALANCE X-200RNA
Page 6: ...Table of contents SCALANCE X 200RNA 6 Operating Instructions 10 2016 C79000 G8976 C342 04 ...
Page 12: ...Introduction SCALANCE X 200RNA 12 Operating Instructions 10 2016 C79000 G8976 C342 04 ...
Page 16: ...Safety notices SCALANCE X 200RNA 16 Operating Instructions 10 2016 C79000 G8976 C342 04 ...
