Siemens SCALANCE W1750D CLI Page 702 Function Manual Download

Page: 702 / 762

CLI Commands

4.20 W

SCALANCE W1750D CLI

702

Function Manual, 03/2019, C79000-G8976-C452-04

4.20.9

wificall-dns-pattern

Description

This command configures Wi-Fi Calling. Wi-Fi Calling is enabled by default. The DSCP value

for the voice session is 48 (without ACP) and 46 (with ACP).

Syntax

wificall-dns-pattern <dns_pattern>

no…

Parameter

Description

Range

Default

<dns_pattern>

Configure the DNS pattern for the carrier. A maxi-

mum of 10 DNS patterns can be configured. DNS

patterns for known carriers are configured by de-

fault. Default built-in patterns are:

•

3 HK - wlan.three.com.hk

•

ATT - epdg.epc.att.net

•

Rogers-

epdg.epc.mnc720.mcc302.pub.3gppnetwork.or

•

SmarTone-

epdg.epc.mnc006.mcc454.pub.3gppnetwork.or

•

Sprint - primgw.vowifi2.spcsdns.net

•

T-Mobile -

ss.epdg.epc.mnc260.mcc310.pub.3gppnetwork.

org

•

Verizon - wo.vzwwo.com

If the ePDG FQDN of the carrier does not match

with the default patterns, use this option to con-

figure the DNS pattern for the carrier.

NOTE: The DNS IP address that AP learns for Wi-

Fi calling age out automatically, if there was no

DNS query or response matching that IP for more

than seven days.

priority voice:

0-62

priority

voice: 46

no…

Remove the configuration

—

Usage Guidelines

Use this command to configure a DNS pattern for the wi-fi calling client.

Example

The following example configures the DNS pattern for a Wi-Fi calling client:

(scalance)(config)# wificall-dns-pattern xo.xyz.com

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Related manuals for SCALANCE W1750D CLI

Brands by name

Popular brands

Siemens SCALANCE W1750D CLI, Function Manual

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Related manuals for SCALANCE W1750D CLI

Brands by name

Popular brands