Siemens SCALANCE W1750D CLI Page 680 Function Manual Download

Page: 680 / 762

CLI Commands

4.20 W

SCALANCE W1750D CLI

680

Function Manual, 03/2019, C79000-G8976-C452-04

Command/Parameter

Description

Range

Default

radius-reauth-

interval

Allows you to configure an interval after

which the APs can redo the RADIUS

transaction to reauthenticate clients.
If the reauthentication interval is config-

ured:

•

On an SSID performing L2 authenti-

cation (MAC or 802.1X authentica-

tion): When reauthentication fails,

the clients are disconnected. If the

SSID is performing only MAC au-

thentication and has a pre- authenti-

cation role assigned to the client, the

client will get a post-authentication

role only after a successful reau-

thentication. If reauthentication fails,

the client retains the pre- authentica-

tion role.

•

On an SSID performing both L2 and

L3 authentication (MAC with captive

portal authentication): When reau-

thentication succeeds, the client re-

tains the role that is

Any integer value

in minutes

—

radius-interim- ac-

counting-interval

Configures an interval for posting ac-

counting information as RADIUS

INTERIM accounting records to the

RADIUS server.
When configured, the AP sends interim-

update messages with current user

statistics to the RADIUS server at regu-

lar intervals.

0–60

—

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Related manuals for SCALANCE W1750D CLI

Brands by name

Popular brands

Siemens SCALANCE W1750D CLI, Function Manual

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Related manuals for SCALANCE W1750D CLI

Brands by name

Popular brands