Siemens SCALANCE W1750D CLI Function Manual Download Page 676

Page: 676 / 762

CLI Commands

4.20 W

SCALANCE W1750D CLI

676

Function Manual, 03/2019, C79000-G8976-C452-04

Command/Parameter

Description

Range

Default

local-probe-req-

thresh

Configures a Received signal strength

indication (RSSI) threshold value to limit

the number of incoming probe requests.
When enabled, this command controls

the system response to the broadcast

probe requests sent by clients to search

for the available SSIDs and ignores the

probe request if required,

0-100 dB

—

mac-authentication

Enables MAC authentication for clients

that use this SSID profile.

—

Disabled

mac-authentication-

delimiter <delim>

Allows you to set a delimiter that can be

used in the MAC address string for MAC

authentication.
You can specify colon or dash for delim-

iter. If the delimiter is not specified, the

MAC address in the xxxxxxxxxxxx for-

mat is used. If you specify colon for the

delimiter, the MAC addresses in the

xx:xx:xx:xx:xx:xx format are used.

colon or dash

—

mac-authentication-

upper-case

Enables the AP to use uppercase letters

in MAC address string for MAC authen-

tication.

—

max-authentication-

failures <limit>

Configures the maximum number of

authentication failures to dynamically

blacklist the users.
The users who exceed the number of

authentication failures configured

through this command are dynamically

blacklisted.

—

max-retries

Denotes the maximum number of retries

the AP attempts when the client is not

responding to the 802.11 frames.

1–128

mdid

Denotes the mobility domain identifier.

An AP uses this parameter to announce

that it is a part of the AP group that

constitutes a mobility domain.

1-65535

Disabled

mfp-capable

When enabled, the SSID supports man-

agement frame protection (MFP) capa-

ble clients and non-MFP clients.

—

Disabled

mfp-required

When enabled, the SSID supports only

the clients that exhibt the
MFP functionality

—

Disabled

max-clients-threshold

Configures the maximum number of

clients for a BSSID on a WLAN.

0-255

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Siemens SCALANCE W1750D CLI, Function Manual, Page: 676 / 762

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews: