Siemens SCALANCE W1750D CLI Function Manual Download Page 591

Page: 591 / 762

CLI Commands

4.16 S

SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04

591

Parameter

Description

wireless

Generates a log about radio configuration.

syslog-

level<level>

Displays any of the following Syslog logging level configured for the Syslog facility.

•

Emergency—Panic conditions that occur when the system becomes unusable.

•

Alert—Any condition requiring immediate attention and correction.

•

Critical—Any critical conditions, for example, hard drive error.

•

Errors—Error conditions.

•

Warning—Warning messages.

•

Notice—Significant events of a non-critical and normal nature. The default

value for all Syslog facilities.

•

Informational—Messages of general interest to system users.

•

Debug—Messages containing information useful for debugging.

Command Information

AP Platform

Command Mode

All platforms

Privileged EXEC mode

4.16.211

show tacas-servers

Description

This command displays all the tacacs servers configured on an AP.

Syntax

show tacacs-servers

Usage Guidelines

Use this command to view the list of tacacs servers available on an AP.

Example

The following example shows the output of the show tacacs-servers command:

TACACS Servers

--------------

Name IP Address Port Key Timeout Retry Count In Use

---- ---------- ---- --- ------- ----- ----- ------

tacacs1 10.64.16.240 49 pass123 20 1 Yes

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Siemens SCALANCE W1750D CLI, Function Manual, Page: 591 / 762

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews: