Siemens SCALANCE W1750D CLI Page 62 Function Manual Download

Page: 62 / 762

CLI Commands

4.2 B

SCALANCE W1750D CLI

Function Manual, 03/2019, C79000-G8976-C452-04

mode <opmode>

Parameter

Description

Range

Default

config

Allows you to enable BLE beacon management by

BMC.

—

<token>

Configures a text string of 1-255 characters as the Blue-

tooth Low Energy (BLE) endpoint authorization token.

The authorization token is used by the BLE devices in

the HTTPS header when communicating with the BMC.

—

<url>

Configures the URL of the server to which the BLE

monitoring data is sent.

—

mgmt-server

<type>

This parameter registers the WebSocket endpoint of a

management server for BLE data, such as the Meridian

editor, on the AP. The WebSocket endpoint allows the

management server to receive messages from the BLE

relay process on the AP.
NOTE: Only one endpoint configuration is supported at

a given time. A new endpoint configuration will overwrite

the existing configuration.

—

<https>

URL or IP address of the HTTPS endpoint. This pa-

rameter is highly recommended for meridian load

balance.

—

<ws>

URL of the WebSocket endpoint.

—

mode <op-

mode>

Configures the operation modes for the built-in Bluetooth

Low Energy (BLE) chip in the AP.
APs support the following BLE operation modes:

•

Beaconing: The built-in BLE chip of the AP functions

as an iBeacon combined with the beacon manage-

ment functionality.

•

Disabled: The built-in BLE chip of the AP functions in

the beaconing mode and dynamically enables

access to AP console over BLE when the link to the

LMS is lost.

•

DynamicConsole: The built-in BLE chip of the AP

functions in the beaconing mode and dynamically

enables access to AP console over BLE when the

link to the LMS is lost. The dynamic console mode

performs special error checks when the AP experi-

ences connectivity issues and decides if the BLE

Console needs to be enabled.

•

PersistentConsole: The built-in BLE chip of the AP

provides access to the AP console over BLE and

also operates in the Beaconing mode.

beaconing

disabled
dynamic-

console
persistent-

console

Disabled

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Related manuals for SCALANCE W1750D CLI

Brands by name

Popular brands

Siemens SCALANCE W1750D CLI, Function Manual

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Related manuals for SCALANCE W1750D CLI

Brands by name

Popular brands