Siemens SCALANCE W1750D CLI Page 671 Function Manual Download

Page: 671 / 762

CLI Commands

4.20 W

SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04

671

Command/Parameter

Description

Range

Default

a-max-tx-rate <rate>

Configures the specify the maximum

transmission rate for the 5 GHz band.

6,9,12,18,24,36,48

,54 in Mbps

a-min-tx-rate <rate>

Configures the specify the minimum

transmission rate for the 5 GHz band.

6,9,12,18,24,36,48

,54 in Mbps

a-tx-rate <rate>

Allows you to configure specific trans-

mission rate at which AP can transmit

data to the clients connected on 5 GHz

band.

6,9,12,18,24,36,48

,54 in Mbps

All

accounting-server

<name>

This command configures a server for

accounting purpose.

—

adverstise-ap-name

When enabled, the AP will broadcast

the AP Name information in the bea-

cons frames.

—

air-time-limit <lim-

it>

Configures an aggregate amount of

airtime that all clients using this SSID

can use for sending and receiving data.

—

auth-pkt-mac-format

{delimiter|upper-

case}

Configures a delimiter and upper- case

characters in a MAC Address string of

authentication packet or the username

and password of the client.
The delimiter and upper-case parame-

ters in this command are available for all

authentication methods. And without the

mac- authentication-delimiter and mac-

authentication-upper-case configuration,

it works on the username and password

for
MAC Authentication.

—

auth-req-thresh

Allows you to set a threshold for authen-

tication requests for the SSID profile.

—

auth-server <name>

Configures an authentication server for

the SSID users.

—

auth-survivability

Enables the authentication survivability

feature.
NOTE: The authentication survivability

feature requires ClearPass Policy Man-

ager 6.0.2 or later, and is applicable

only when external servers
such as RADIUS are configured for the

SSID. When enabled, Scalance W au-

thenticates the previously connected

clients using EAP-PEAP authentication

even when connectivity to ClearPass

Policy Manager is temporarily lost. The

Authentication survivability feature is not

applicable when a RADIUS server is

configured as an internal server.

—

bandwidth-limit

<limit>

Configures an aggregate amount of

bandwidth that each radio is allowed to

provide for the connected clients.

1—65535

—

blacklist

Enables dynamic blacklisting of clients. —

—

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Related manuals for SCALANCE W1750D CLI

Brands by name

Popular brands

Siemens SCALANCE W1750D CLI, Function Manual

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Related manuals for SCALANCE W1750D CLI

Brands by name

Popular brands