Siemens SCALANCE W1750D CLI Function Manual Download Page 626

Page: 626 / 762

CLI Commands

4.16 S

SCALANCE W1750D CLI

626

Function Manual, 03/2019, C79000-G8976-C452-04

Syntax

speed-test {<server> <protocol> [<bandwidth> | <include-reverse> | <omit> |
<parallel> | <sec- to-measure> | <server-port> | <window>]}

Parameter

Description

Range

Default

server

Enter the IP address of the Iperf server on

which the speed test needs to be run.

—

protocol

[<tcp>|<udp>]

Enter the protocol type used for executing the

speed test.

—

tcp

bandwidth

Enter the bandwidth length in Mbps.

—

include-reverse

The direction of traffic is reversed and sent

from the server to the client. This option ena-

bles Iperf to run the speed test for an extended

duration.

—

omit

Enter the number of initial seconds to omit.

1-5

—

parallel

Enter the number of parallel client streams.

1-30

—

sec-to-measure

<secs>

Specify a duration (in secs) for the speed test. 0-20 secs

10 secs

server-port

<port>

Enter the server port that the client needs to

connect to execute the speed test.

—

5201

window

Indicates the TCP window size or socket buffer

size sent to the server while run- ning speed

test.

64000–

16384000

—

Usage Guidelines

Use this command to run a speed test on the Iperf server at any instant.

Example

The following example runs a speed test on the Iperf server:

(scalance)# speed-test 10.17.138.2 udp bandwidth 100 sec-to-measure 20 server-port
5201

parallel 12 omit 2 window 1

Command Information

AP Platform

Command Mode

All platforms

Privileged EXEC mode

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Siemens SCALANCE W1750D CLI, Function Manual, Page: 626 / 762

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews: