Siemens SCALANCE W1750D CLI Function Manual Download Page 519

Page: 519 / 762

CLI Commands

4.16 S

SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04

519

192.168.10.0

0.0.0.0

255.255.254.0

br0

0.0.0.0

10.17.88.129

0.0.0.0

br0

The output of this command provides the following information:

Column

Description

Destination

Displays the destination IP address for the IP routes.

Gateway

Displays the gateway IP address for the IP routes.

Genmask

Displays the subnet mask details for the IP routes.

Flags

Indicates if the route is up (U), targeted to the host (UH), or if it uses Gate-

way (UG).

MSS

Indicates the default MSS for TCP connections over this route.

Window

Indicates the default window size for TCP connections over this route.

irrt

Indicates the initial RTT. The kernel uses this to determine the best TCP

protocol parameters instead of relying on slow responses.

Iface

Indicates the Interface to which packets are routed.

Command Information

AP Platform

Command Mode

All platforms

Privileged EXEC mode

4.16.149

show ipv6 interface

Description

Shows IPv6-related information for all interfaces on the AP.

Syntax

show ipv6 interface {brief|details}

Parameter

Description

brief

Displays a brief summary of the IPv6-related information on all

interfaces of an AP.

details

Displays detailed information on the interfaces that support IPv6.

Usage Guidelines

Use this command to view IPv6 related information on an AP.

Example

The following example shows the output of the show ipv6 interface brief command:

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Siemens SCALANCE W1750D CLI, Function Manual, Page: 519 / 762

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews: