CLI Commands
4.20 W
SCALANCE W1750D CLI
672
Function Manual, 03/2019, C79000-G8976-C452-04
Command/Parameter
Description
Range
Default
broadcast-filter
{All|ARP|Unicast-
ARP-Only|Disabled}
Configures broadcast filtering parame-
ters:
You can configure any of the following
filtering parameters:
•
All—When set to All, the AP drops
all broadcast and multicast frames
except DHCP, ARP, igmp-group
queries, and IPv6 neighbor discov-
ery protocol.
•
ARP—When set to ARP, the AP
drops all broadcast and multicast
frames except ARP, DHCP, igmp-
group queries, IPv6 neighbor dis-
covery protocol, and additionally
converts ARP frames to unicast.
•
Unicast-ARP-Only — When set to
Unicast-ARP-Only, the AP allows all
broadcast and multicast frames as it
is, however the ARP requests are
converted to unicast frames and
sends them to the associated cli-
ents.
•
Disabled— When set to Disabled,
the AP routes all the broadcast and
multicast frames to the wireless in-
terfaces.
All, ARP, Disabled Disabled
called-station-
id{type{ap-group|ap-
name|ipaddr|macaddr|v
l an-id} |include-
ssid [delimiter]}
Configures the following called-station-
id types:
•
ap-group — The VC name is used
as the called-station-id.
•
ap-name — The AP hostname is-
used as the called-station-id.
•
vlan-id — The VLAN ID of the client
is used as the called-station-id.
•
ipaddr — The IP address of the AP
is used as the called-station-id.
•
macaddr — The MAC address of the
AP is used as the calling- station-id.
•
include-ssid {delimiter<delimiter>} —
The SSID is appeneded to the origi-
nal called- station-id. You can op-
tionally set a delimiter at the end.
—
calledstati
on- id
{type
<macadd
r>}
captive-portal
{<type>[exclude-
uplink
<types>]
|external[exclude-
uplink
<types>|profile
<name> [exclude-
Configures captive portal authentication
for the SSID. If the external captive
profiles are created, you can specify the
profile name by using the external and
profile keywords and associated pa-
rameters.
—
—
