Siemens SCALANCE W1750D CLI Function Manual Download Page 677

Page: 677 / 762

CLI Commands

4.20 W

SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04

677

Command/Parameter

Description

Range

Default

multicast-rate- opti-

mization

Allows the AP to select the
optimal rate for sending broadcast and

multicast frames based on the lowest of

unicast rates across all associated cli-

ents.
When enabled, the multicast traffic can

be sent at the rate of 1- 24 Mbps. The

default rate for sending frames for 2.4

GHz is 1 Mbps and 5.0 GHz is 6 Mbps.

—

Disabled

mpdu-agg-disable

Disables MAC Protocol Data Unit

(MPDU) aggregation

—

okc

Enables opportunistic key caching

(OKC).
In the OKC based roaming, the AP

stores one pairwise master key (PMK)

per client, which is derived from last

802.1X authentication completed by the

client in the network. The cached PMK

is used when a client roams to a new

AP to allow faster roaming of clients.
NOTE: If the wireless client (the 802.1X

supplicant) does not support this fea-

ture, a complete 802.1X authentication

is required whenever it roams to a new

AP. OKC is supported on WPA2-AES

Enterprise network only.

—

Disabeld

openflow-enable

Configures OpenFlow to an AP.

—

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Siemens SCALANCE W1750D CLI, Function Manual, Page: 677 / 762

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews: