Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download Page 51

Page: 51 / 120

Making Calls – Convenience Functions

Step by step

Accepting a second call with a sensor key

Prerequisite:

You are conducting a call "Camp/Overide"

is activated. The "Pickup" sensor key is programmed.

An alert tone is audible.

The LED on the "Pickup" sensor key flashes. The caller
hears the ring tone.

Press the key shown.

[

You are connected to the call waiting party immediately.
The first party is placed on hold.

Ending the second call and resuming the first one:

Press the key shown.

Replace the handset and lift it once more.

Accepting a second call via the menu

Prerequisite:

You are conducting a call and the "Camp/

Overide" function is activated.

The name/phone number of a second call is displayed
on the telephone and signaled via the call waiting tone.
The caller hears the same ring tone as if they were free.

Select and confirm.

[

You can talk to the second party.

The connection to the first party is on hold.

Ending the second call and resuming the first one

Press the key shown.

Replace the handset and lift it once more.

Answer camp-on?

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands