Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download

Page: 55 / 120

Making Calls – Convenience Functions

Step by step

Adding a party

Any party in a system conference can extend the con-
ference by

•

calling a specific party and connecting them

•

connecting a party from a consultation call to the
conference, or

•

accepting a second call and connecting the caller to
the conference.

Calling a specific party and connecting them

You intend calling another party and connecting them to
the conference.

Select and confirm.

Call the new party.

Inform this party that you are initiating a conference.

Select and confirm.

The party is connected to the conference.

If the new party does not answer

Select and confirm.

Extending a conference by adding a consultation
call

During the conference, you wish to hold a consultation
call.

Select and confirm.

Call a party.Hold the consultation call.

Select and confirm to connect the party from the con-
sultation call to the conference.

Toggle between the conference and the consultation
call.

Select and confirm to end the consultation call and re-
turn to the conference.

Add to conference?

Conference?

Return to conference?

Consultation?

Conference?

Toggle?

Release and return?

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands