Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download Page 35

Page: 35 / 120

Making Calls – Basic Functions

Step by step

Call forwarding

Overview of forwarding types

You can configure different call forwarding settings for
your station.

Apart from "Forwarding for intnl" and "Forwarding for
extnl", the call forwarding types preclude each other. For
the two exceptions, you can program and activate one
call forwarding destination.

If your belongs to an ONS group (parallel call

page 112), please note the following:

Call forwarding can be configured on any phone
in the ONS group and will then apply to all pho-
nes in that ONS group.

Call forwarding between two phones in an ONS
group is not possible.

Variable call forwar-
ding

All calls are forwarded to the
saved phone number, the pho-
ne number is deleted after
deactivation.

Fixed call forwarding

All calls are forwarded, the sa-
ved phone number is not dele-
ted after deactivation.

Forwarding for intnl

Only internal calls are forwar-
ded.

Forwarding for extnl

Only external calls are forwar-
ded.

Call forwarding -
busy

If your station is busy, all calls
are forwarded.

Call forward. no reply If you do not answer a call, all

calls are forwarded

[1]

after a

certain length of time.

[1] This duration is defined by your service personnel.

Call forward. busy/no
reply

If your station is busy or you
do not answer a call, all calls
are forwarded after a certain
length of time

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands