Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download Page 111

Page: 111 / 120

Testing the Telephone

111

Step by step

Testing the Telephone

Testing functionality

You can test and determine your phone’s functionality:
•

Are all LED keys working?

•

Is the display working?

•

Do all keys work?

•

Are the speaker, handset, ring volume, ring tone,
alert tone and speakerphone mode functioning cor-
rectly?

The following may be checked by service personnel:
•

Device ID for the phone,

•

software versionOpenStage

•

Line power level

Prerequisite:

The phone is in idle mode

page 19.

Open the service menu

page 26.

Enter the service code.

Select and confirm.

Select and confirm the required test functions. Follow
the additional user prompts on the display.

Press the key shown. The LED goes out. The test is
complete.

Phone test?

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands