Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download Page 64

Page: 64 / 120

Step by step

Making Calls – Convenience Functions

Press the programmable repdial key. A connection to
the destination loudspeaker is immediately established.

The called party can accept the connection by lifting the
handset.

If the called party presses the speaker key or the line
key (if configured), the connection is lost.

Two-way intercom to a variable destination

When using the two-way intercom in a group, the loud-
speaker and the microphone of the destination phone
are automatically switched on.

Lift the handset.

Press the key and enter speakerphone mode.

Enter the system code for "Speaker call-two-way" (con-
tact the relevant service personnel if necessary).

Enter the speed dial number for the corresponding
group member.

The loudspeaker and microphone of the destination
phone are automatically switched on.

Press the "COM Spk 2way" programmed sensor key.

Enter the speed dial number for the corresponding
group member.

The loudspeaker and microphone of the destination
phone are automatically switched on.

Two-way intercom to a fixed destination

The system code for "Speaker call-two-way" and the
speed dial number for the corresponding group mem-
ber are programmed on the repdial key

page 74.

Press the programmed sensor key.

The loudspeaker and microphone of the destination
phone are automatically switched on.

Enter code!

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands