Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download Page 94

Page: 94 / 120

Step by step

Making Calls via Multiple Lines

Saving phone numbers for "Redial on a
line"

Prerequisite:

"Saved number redial with saved num-

ber" is configured,

not

"Saved number redial with last

number dialed".

Saving the dialed phone number or a caller’s phone
number

You have called a party on a particular line and this call
is still in progress. Or, you were called by another party
whose phone number is displayed, and this call is still in
progress.

Press the key shown. The phone number is saved for
the current trunk.

Press the key shown. The LED goes out.

Replace the handset.

Line mailbox

Callers who wish to reach you when you are absent can
leave a message on the mailbox for the relevant line.

Both voice and fax messages can be stored in the mail-
box (if so configured).

Prerequisite

: A mailbox is configured for one or more

lines.

Please note that only one user can edit one mailbox at
any time.

If your belongs to an ONS group (parallel call

page 112), please note the following:

Signaling is available for the mailbox (MWI) on all
phones in an ONS group.

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands