Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download

Page: 41 / 120

Making Calls – Basic Functions

Step by step

Using callback

In idle mode

page 19, the following signals alert you

to the presence of saved callbacks:

The LED key lights up.

The callback symbol and the number of callback re-
quests are displayed.

Storing a callback

Prerequisite:

The internal station called is busy or no-

body answers.

Confirm the option shown.

Accepting a callback

Prerequisite:

You have saved a callback request. Your

telephone rings.

Lift the handset. You hear a ring tone.

Press the key shown. You hear a ring tone.

If your belongs to an ONS group (parallel call

page 112), please note the following:

Callback on busy is only signaled on the busy
phone, not in the whole ONS group.

Callback on no reply is entered in the mailbox
(

page 23) on all internal system phones in an

ONS group.

Callback?

If the party has activated call forwarding
(

page 35), you will receive the callback from

the call forwarding destination.

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands