Siemens MOBILETT XP Instructions For Use Manual Download Page 48

Page: 48 / 109

Operation

Operator Manual

SPR8-230.621.01.03.02

of 106

With IR remote control (Option)

The IR remote control comprises the following functional elements.

(1) Remote finder

Built-in feature locates remote control if left out of its holder (starts beeping

automatically within three minutes after use).

(2) Collimator light button ON/OFF

Press to turn on collimator light.

(3) Infrared window
(4) Low battery indicator

Illuminates when battery is low and needs to be replaced.

(5) Exposure release switch

Press once to activate preparation.

Press again and hold to make the exposure.

(6) Battery compartment

(9-volt alkaline included)

The remote finder and the low battery indicator are not implemented in the spare
remote control (included in the kit).

Summary of Contents for MOBILETT XP














































































































Search results

Summary of Contents for MOBILETT XP

Reviews:

Related manuals for MOBILETT XP

Brands by name

Popular brands

Siemens MOBILETT XP, Instructions For Use Manual

Search results

Summary of Contents for MOBILETT XP

Reviews:

Related manuals for MOBILETT XP

Brands by name

Popular brands